Disassembling And Servicing The Swinging Arm - Husqvarna TC449 Workshop Manual

A
3
2
4
3
REAR SUSPENSION

Disassembling and servicing the swinging arm

H006192
- Remove the chain and rear wheel, as described in the relevant chapters.
- Remove the two side protections (A) from the chassis.
- Disconnect the rear stop connector (1).
H006183
1
- Loosen the two screws (2) and remove the brake master cylinder (3) complete
with tube and calliper (4).
H006184
H006185
J.6
1 edition (08-2010) _Rev. 11-2010
st