Clutch Housing Assembly; Clutch Hub Assembly; Removing Clutch Plates - Husqvarna TC449 Workshop Manual

H01858
H01859
H01860
ENGINE DISASSEMBLY/REASSEMBLY

Clutch housing assembly

• Lubricate bearing (3), and assemble it.
Consumables
Molykote D Paste
• Assemble clutch housing (2).
• Fit thrust washer (1).

Clutch hub assembly

• Lubricate hub (2) inner toothing, and fit it.
Consumables
MP 3 paste
• Clean crankshaft thread, and nut (1).
• Fit nut (1).
Tightening torque figures
Clutch hub on crankshaft
Collar nut, M20 x 1.5 - 10.9,
Replace microincapsulated screw
nut
Fit clutch plates
• Take special care that inner line plate cavities (arrows) 2 and 3 are aligned
with clutch hub oil holes.
F1.30
Clear solid lubricant for
metal part assembling
and settling
High-performance
lubricating grease
120 Nm
1 edition (08-2010) _Rev. 11-2010
st