Husqvarna TC449 Workshop Manual page 209

Gear selector lock replacement
H02014
H02014
1 edition (08-2010) _Rev. 11-2010
st
ENGINE DISASSEMBLY/REASSEMBLY
Preliminary operations
Clutch cover disassembly
Removing clutch pressure plate
Removing clutch plates
Clutch hub disassembly
Clutch housing disassembly
Coolant pump cover disassembly
Coolant pump rotor disassembly
Engine right crankcase cover disassembly
Gear selector disassembly
• Remove gear selector lock, and secure it using a suitable auxiliary tool.
• Remove screw (1).
• Remove gear selector (2) with reference pin (3).
• Remove gear selector lock retainer.
Gear selector assembly
• Remove gear selector lock, and secure it using a suitable auxiliary tool.
• Fit gear selector (2) with reference pin (3).
• Fit screw (1).
Tightening torque figures
Gear selector on selector drum
M6 x 16, Microincapsulated screw
replacement
• Remove gear selector lock retainer.
F1.103
11 Nm