Starter Motor Drive Gear Fitting; Gear Assembly With Starter Motor Protected Against Overload - Husqvarna TC449 Workshop Manual

H01726
H01725
ENGINE DISASSEMBLY/REASSEMBLY
Starter motor idle gear fitting
• Lubricate bushing (5), and needle roller bearing (4), then assemble them.
Consumables
Molykote D Paste
• Lubricate gear (3), and assemble it with the dowel pointing towards counter-
shaft.
Consumables
Molykote D Paste
• Fit washer (2) with nut (1), but do not tighten them.

Gear assembly with starter motor protected against overload

• Lubricate shaft (2) with gear (1), and assemble them.
Consumables
Molykote D Paste
F1.72
Clear solid lubricant for metal
part assembling and settling
Clear solid lubricant for metal
part assembling and settling
Clear solid lubricant for metal
part assembling and settling
1 edition (08-2010) _Rev. 11-2010
st