Front Fork Disassembly (Tc - Txc) - Husqvarna TC449 Workshop Manual

FRONT SUSPENSION

Front fork disassembly (TC - TXC)

Loosen the cap nut at the top of each outer tube.
(Note: it is good practice to moderately slacken the cap nuts before removing
the fork legs from the motorcycle).
Drain oil from the damper unit.
Clamp the wheel axle carrier in a vice and loosen the adjuster screw.
Push down the inner tube.
Slip the tool shown in the figure between wheel axle carrier and cartridge nut.
Hold the nut with a wrench and remove the adjuster screw.
Be careful not to hurt your fingers.
I.7
1 edition (08-2010) _Rev. 11-2010
st