Re- Assembling The Pumping Element Unit And The Bottom Valve - Husqvarna TC 450 Workshop Manual

1 1
1 2
FRONT SUSPENSION
• Mount the stop ring ( 11 ) using a small flat- tip screwdriver, checking it fits per-
fectly into its groove and being very careful not to scratch the stanchion tube.
• Re- assemble the dust seal ( 12 ) in its seat, pressing it home with your han-
ds.
RE- aSSEMBlINg ThE PUMPINg ElEMENT UNIT aND ThE BOTTOM
valvE
3 0
• Insert the pumping element rod ( 32 ) into the body ( 30 )
In both pumping elements there is a sealing segment; before the assembling
make sure that it is not worn or damaged. Replace if necessary. Take great
care and if necessary use a small flat- tip screwdriver to help the pumping
3 2
element piston into the sleeve. Insert the piston without any interference.
I.20
Part. N. 8000 H1344 (10-2009)