Husqvarna TC449 Workshop Manual page 75

2
4
5
1 edition (08-2010) _Rev. 11-2010
st
GENERAL PROCEDURES
- Working on the right side, loosen upper screw (1) using a 12 mm T-
wrench.
1
H06372
- Working on the left side, loosen screw (2) using a 12 mm T-wrench.
H02444
- Loosen clamp (4) screw (3) (with a 13 mm wrench), and move it onto the
exhaust manifold.
3
H02448
- Remove silencer (5).
H02445
E.17