Subsequent Actions - Husqvarna TC449 Workshop Manual

H01836
H01837
ENGINE DISASSEMBLY/REASSEMBLY
• Remove the gasket protruding out of the flange used for cylinder connec-
tion.
• Apply reference pins (3), and a new gasket (2).
• Insert timing chain inside recess, fit cylinders (1) with piston until connecting
rod small end.
• Keep cylinder (1) with piston (2) at the height of connecting rod small end.
• Lubricate piston pin (3), and assemble it.
Consumables
Molykote D Paste
• Fit the new stop rings (4).
Make sure to respect correct assembly position.
• Fit the screws at cylinder (5) bottom.
• Fit cylinder.

Subsequent actions

Valve clearance check
F1.58
Clear solid lubricant for
metal part assembling
and settling
1 edition (08-2010) _Rev. 11-2010
st