Clutch Hose Removal - Husqvarna TC449 Workshop Manual

1
2
7
6
1 edition (08-2010) _Rev. 11-2010
st
GENERAL PROCEDURES

Clutch hose removal

- Loosen screw (1) (with a 8 mm wrench), and move number plate holder or
headlamp fairing.
H02468
- Loosen screw (2) (with a 8 mm wrench), and remove the cover (3).
3
H02467
- Loosen screw (4) (with a 8 mm wrench), and disconnect clamp (5) from
5
engine.
- Loosen clutch hose (7) union (6), and drain all oil out of hose. On reassembly,
bleed the clutch system as described in Section "P".
4
H02469
E.27