Stop Lever Replacement; Gear Selector Lock Disassembly; Gear Selector Lock Assembly - Husqvarna TC449 Workshop Manual

Stop lever replacement

H02013
H02013
ENGINE DISASSEMBLY/REASSEMBLY
Preliminary operations
Clutch cover disassembly
Removing clutch pressure plate
Removing clutch plates
Clutch hub disassembly
Clutch housing disassembly
Coolant pump cover disassembly
Coolant pump rotor disassembly
Engine right crankcase cover disassembly

Gear selector lock disassembly

• Disassemble the following parts:
- screw (1)
- Bushing (2)
- Stop element (3)
- Washer (4)
- Spring (5)

Gear selector lock assembly

• Assemble the following parts:
- Spring (5)
- Washer (4)
- Stop element (3)
- Bushing (2)
• Fit new screw (1).
Tightening torque figures
Stop lever on crankcase lower side
M6 x 16 Microincapsulated screw
replacement
F1.102
11 Nm
1 edition (08-2010) _Rev. 11-2010
st