Husqvarna TC449 Workshop Manual page 68

11
12
GENERAL PROCEDURES
- With a 8 mm socket wrench, undo screw (11), and remove the screw with
rubbers and spacers.
On reassembly, tighten screw (11) to 10 Nm - 1.0 Kgm - 7.38 ft/lb.
H02424
- Remove tank (12) and drain any residual fuel through cock.
For upper tank removal, refer to the rear chassis removal paragraph.
H02423
E.10
1 edition (08-2010) _Rev. 11-2010
st