Power Module - Kodak DryView 8300 Service Manual

SERVICE MANUAL
4-4-2.

Power Module

1. Turn off power and disconnect the power cord.
2. Remove the left and right side covers (see paragraph 4-2-1).
Note
The front panel may be loosened to facilitate removal.
3. Disconnect the electrical connectors from the right side of the module (Figure 4-10).
4. Disconnect the fan motor connector from the Motor Control PWA.
5. Remove one screw from the left side of the power module and disconnect the electrical connector from
the power switch cable (Figure 4-11).
6. Slide the power module out the left side of the machine (Figure 4-11).
4-10
Figure 4-10.
6
5
Figure 4-11.
1908110 2004 March Rev. R