Kodak DryView 8300 Service Manual page 185

(00000002) Affected SOP Class UID
'1.2.840.10008.5.1.1.4' Basic Greyscale Image Box
(00000100) Command Field
0x8120 33056 N--Set RSP
(00000120) Message ID Being Responded To
0x0005 5
(00000900) Status
0x0000 0
(00001000) Affected SOP Instance UID
'3.1.1.1'
****** End Command Set ******
****** Begin Data Set ******
(20100060) Magnification Type
'CUBIC '
(20100080) Smoothing Type
'0 '
(20200010) Image Position
0x0001 1
(20200020) Polarity
'NORMAL'
(20200110) Preformatted Greyscale Image Sequence
Start of Item
(00280002) Samples Per Pixel
0x0001 1
(00280004) Photometric Interpretation
'MONOCHROME2 '
(00280010) Rows
0x0200 512
(00280011) Columns
0x0200 512
(00280034) Pixel Aspect Ratio
'1\'
'1 '
(00280100) Bits Allocated
0x0008 8
(00280101) Bits Stored
0x0008 8
(00280102) High Bit
0x0007 7
'00280103) Pixel Representation
0x0000 0
End of Item
End of Sequence
****** End Data Set ******
Incoming DICOM message from AnySCU_163.228.142.119: (client's request to print the image)
****** Begin Command Set ******
(00000003) Requested SOP Class UID
'1.2.840.10008.5.1.1.2' Basic Film Box
2004 December Rev. S 1908110
(the response is for the Basic Greyscale
Box)
(response is the Normalized--Set
Response)
(status still 0, if it was C605 it would
mean out of image memory)
(IMAGER response with print parameters it
will use)
(1/1 =1.0, 4/3 would = 1.33)
(print request is for a Basic Film Box again)
TROUBLESHOOTING
7-17