Kodak DryView 8300 Service Manual page 189

MODULE/BOARD
SCSI LSB
Network RECEIVE
TRANSMIT
COLLISION
LINK INTEGRITY
POLARITY
COAX/~TPE
2004 December Rev. S 1908110
Signal Name
Data LSB: The LSB of the SCSI BUS.
Data Receive indicates data is being received on currently
active PORT. Frequency of blinking is determined by
receive activity.
Data Transmit indicates data is being sent on currently
active PORT. Frequency of blinking is determined by
transmit activity.
Indicates Collisions between devices on the network.
Frequency of blinking is determined by frequency of
Collisions.
Monitor of Twisted Pair (TPE) Link to indicate an active and
valid connection.
Indicates a miswired TPE Link. Card will automatically
compensate if the auto polarity correction is enabled in S/W.
On indicates the 10Base2 coax line is selected for use. Off
indicates the 10BaseT twisted Pair PORT is selected.
Signal Description
TROUBLESHOOTING
7-21