Kodak DryView 8300 Service Manual page 182

SERVICE MANUAL
Outgoing DICOM message to AnySCU_163.228.142.119:
****** Begin Command Set ******
(00000002) Affected SOP Class UID
'1.2.840.10008.5.1.1.1' Basic Film Session
(00000100) Command Field
0x8140 33088 N--Create RSP
(00000120) Message ID Being Responded To
0x0001 1
(00000900) Status
0x0000 0
(00001000) Affected SOP Instance UID
'3.1'
****** End Command Set ******
****** Begin Data Set ******
(20000010) Number of Copies
'1 '
(20000020) Print Priority
'HIGH'
(20000030) Medium Type
'CURRENT '
(20000040) Film Destination 'PROCESSOR '
****** End Data Set ******
Incoming DICOM message from AnySCU_163.228.142.119: (client is now requesting setup of image)
***** Begin Command Set ******
(00000002) Affected SOP Class UID
'1.2.840.10008.5.1.1.2' Basic Film Box
(00000100) Command Field
0x0140 320 N--Create RQ
(00000110) Message ID
0x0002 2
****** End Command Set ******
****** Begin Data Set ******
(20100010) Image Display Format
'STANDARD\1,1'
(20100500) Referenced Film Session Sequence
Start of Item
(00081150) Referenced SOP Class UID
'1.2.840.10008.5.1.1.1' Basic Film Session
(00081155) Referenced SOP Instance UID
'3.1'
End of Item
End of Sequence
****** End Data Set ******
Outgoing DICOM message to AnySCU_163.228.142.119:
****** Begin Command Set ******
(00000002) Affected SOP Class UID
'1.2.840.10008.5.1.1.2' Basic Film Box
(00000100) Command Field
0x8140 33088 N--Create RSP
7-14
(IMAGER is responding to the request)
(the response is to the Basic Film Session)
(this is a key response field, 0 = success)
(IMAGER is providing some default
settings)
(should be Processor, not Receive
Magazine)
(the request is for a Basic Film Box)
(it is called a Normalized--Create Request)
(client is defining only the film format)
(format is defined by columns, rows)
(the IMAGER is responding)
(the response is for the Basic Film Box)
(Called a Normalized-Create
Response)
1908110 2004 December Rev. S