Kodak DryView 8300 Service Manual page 184

SERVICE MANUAL
Incoming DICOM message from AnySCU_163.228.142.119: (client is now requesting image transfer)
****** Begin Command Set ******
(00000003) Requested SOP Class UID
'1.2.840.10008.5.1.1.4' Basic Greyscale Image Box
(00000100) Command Field
0x0120 288 N--Set RQ
(00000110) Message ID
0x0005 5
(00001001) Requested SOP Instance UID
'3.1.1.1'
****** End Command Set ******
****** Begin Data Set ******
(20200010) Image Position
Value Intercepted by trap or filter mechanism
(20200020) Polarity
'NORMAL'
(20200110) Preformatted Greyscale Image Sequence
Start of Item
(00280002) Samples Per Pixel
0x0001 1
(00280004) Photometric Interpretation
'MONOCHROME2'
(00280010) Rows
Value Intercepted by trap or filter mechanism
(00280011) Columns
Value Intercepted by trap or filter mechanism
(00280034) Pixel Aspect Ratio
'1'
'1'
(00280100) Bits Allocated
Value Intercepted by trap or filter mechanism
(00280101) Bits Stored
0x0008 8
(00280102) High Bit
0x0007 7
(00280103) Pixel Representation
0x0000 0
(7fe00010) Pixel Data
Value Intercepted by trap or filter mechanism
End of Item
End of Sequence
****** End Data Set ******
Outgoing DICOM message to AnySCU_163.228.142.119:
(8300 is responding)
****** Begin Command Set ******
7-16
(request is for Basic Greyscale Image Box)
(request is called a Normalized--Set
Request)
(client requesting this image data to be
used)
(intercepted data shown in summary
above)
(identified as 1 over 1, or 1/1 which = 1)
(8 bit image data, which IMAGER only
supports)
1908110 2004 December Rev. S