Kodak DryView 8300 Service Manual page 30

SERVICE MANUAL
0 20
0
WAA 3.50 MHZ
OUT 25.12%
60DB C5 E4
FR 17 HZ
20
Y
80
100
Parameter
12. Black Level Offset
13. White Level Offset
After determining the correct VIDEO parameters, enter
them in the Service History Log. If a new CPU BOARD is
installed, these VIDEO parameters must be entered into
the new CPU BOARD.
If menu items 14 through 16 are selected, all VIDEO
parameters change to a scripted value. If ENTER is
pressed at menu item 14, items 1 through 6 change to
the parameters for the Acuson 128.
14. 750 X 480
(Acuson 128)
2-12
X = 20 to 90%
Y = 20 to 80%
X 90
FL = 5.5 CM
Options
0 -- 100
0 -- 100
100 0
0
WAA 3.50 MHZ
OUT 25.12%
60DB C5 E4
FR 17 HZ
20
Y
80
100
Figure 2-1.
Leave at 0 unless a darker background is
necessary. At 100, a 5% darker background
is obtained.
Leave at 0 unless brighter whites are
desired. At 100, 5% brighter image data is
obtained
Note: If menu items 14 through 16 are
selected, all VIDEO parameters change to a
scripted value. If ENTER is pressed at
menu item 14, items 1 through 6 change to
the parameters for the Acuson 128.
After determining the correct video
parameters, record them in the Service
History Log. If a new CPU BOARD is
installed, these video parameters must be
entered into the new CPU BOARD.
If menu items 14 through 16 are selected,
all VIDEO parameters change to a scripted
value. If ENTER is pressed at menu item
14, items 1 through 6 change to the
parameters for the Acuson 128.
For default values, press [ENTER]. Press
[EXIT] if you do not want to make changes.
X = 0 to 80%
Y = 20 to 80%
X 80
FL = 5.5 CM
8300- -158L
Action
1908110 2004 December Rev. S
100