Kodak DryView 8300 Service Manual page 176

SERVICE MANUAL
14 3.993789
15 4.098090
16 4.202434
17 4.306768
18 4.411098
19 4.515423
fog index = 0
saturation index = 19
Dmin = 0.182 fog index = 0
Dmax = 3.583 saturation index = 19
Num steps in D logE toe = 5
The smoothed density and significant parameters, D- -max and D- -min, are defined for the 20 bands (0
- - 19). The further conversions that follow may be ignored.
Spline Second Derivatives
0
1.10031
0.13826
1.58897
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3.441225 20265.996094
3.470151 21955.566406
3.496799 23785.968750
3.521088 25768.998047
3.543083 27917.259766
3.563451 30244.613281
3.583004 32765.990234
Calibration was successful
The calibration was successful because the densities increase as expected from D- -min to D- -max and
the minimum of 3.5 D- -max (8610) was reached. If the calibration was on an 8300, a minimum D- -max
of 3.0 would need to be reached.
Note
If the film is measured with an external DENSITOMETER the D--max will usually read slightly higher
than the D--max recorded by the internal DENSITOMETER.
7-8
3.096570
3.238037
3.344372
3.441225
3.521088
3.583004
1908110 2004 December Rev. S