Telling Windows About The New Hardware - Mitsubishi Electric MS Series Owner's Handbook Manual

OWNER'S HANDBOOK

Telling Windows about the new hardware

Windows 95 and Windows NT 4.x (or later) should
automatically detect and configure cards that support
"Plug and Play". In other cases you may have to tell
Windows that you have installed new hardware, as
follows:
1. Click the Start button in the taskbar, then
Settings, then Control Panel.
2. Double-click on Add New Hardware.
3. Follow the instructions in the Add New
Hardware Wizard.
4 / 8 E x p a n s i o n C a r d s