Download  Print this page

The Processor Assembly - Mitsubishi Electric MS Series Owner's Handbook Manual

Hide thumbs

Advertisement

the Reset Configuration Data item to "Yes", then
restart the computer.

The processor assembly

To remove the existing processor
1.
Turn off the computer and unplug all power
cords.
2.
Take suitable anti-static precautions and remove
the right side panel. For more information see
the "Anti-static precautions" section in the Safety
& Regulatory Notices at the start of this manual.
3.
Remove any expansion cards that impede access
to the processor.
4.
If the system was in use immediately before
starting this procedure, the processor will be hot;
wait at least 15 minutes for it to cool down.
M o t h e r b o a r d F e a t u r e s & U p g r a d e s : P e n t i u m I I s y s t e m s
You can then reconfigure your operating system to
use the expanded capabilities of the video controller.
OWNER'S HANDBOOK
6 / 1 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apricot ms series