SAFETY & REGULATORY NOTICES
This product complies with the International safety standard
IEC950 and the European safety standard EN60950 which will,
when applicable, include the national deviations for the country in
which it is first sold.
Electro-magnetic Compatibility (EMC)
This product complies with the following European EMC
This product also complies with the following International EMC
VCCI Level 2
This equipment complies with the relevant clauses of the following
European Directives (and all subsequent amendments):
Low Voltage Directive
CE Marking Directive
EN50022 Class B
All interconnecting cables (for example, microphone, headphones
or external speakers) and communication cables should be less than
2 metres in length.
If cable extensions are used, ensure adequate earth connections are
provided and screened cables are used.
If the system unit top cover, or any other metal part, is removed
and then replaced, all parts must be correctly re-assembled and all
This system complies with the CE Marking Directive and its strict legal
requirements. Use only parts tested and approved by Mitsubishi Electric
PC Division. Failure to do so may result in invalidating both the
compliance and your warranty. All expansion cards, drives and
peripherals must carry the CE mark to ensure continued compliance.