On-board video disabling (J50)
If you install a video adapter expansion card, the
computer should automatically detect this and disable
the on-board video adapter. If for some reason this
does not happen, and you experience problems with a
newly-fitted card, you can manually disable the on-
board video adapter by moving the jumper in block
J50 to pins 2-3.
Audio disabling (J80)
The on-board audio codec can be disabled by moving
the jumpers on jumper block J80 to pins 2-3.
Disabling the audio system frees the interrupts and
DMA channel used by that system (normally IRQ5,
IRQ11, DMA0 and DMA1).
5 / 4
M o t h e r b o a r d F e a t u r e s & U p g r a d e s : P e n t i u m s y s t e m s