Mitsubishi Electric MS Series Owner's Handbook Manual page 49

same settings. See the BIOS Setup & POST chapter
for more information.
Alternatively, you can use the Windows Control
Panel to change the resource settings used by devices:
1. Click the Start button in the taskbar, then
Settings, then Control Panel.
2. Double-click on System, then click the Device
Manager tab of the System Properties dialog.
3. Select the device whose resources you want to
change, then click Properties.
4. Click the Resources tab of the device's
Properties dialog.
If your device does not have a Resources tab,
either you cannot change its resources or it isn't
using any resource settings.
5. Click the resource you want to change, un-check
the Use Automatic Settings box, then click
Change Setting.
Tip
In some cases, you may see a Set Configuration
Manually button on the Resources tab. You may have to
click this button before you can change resource settings.
E x p a n s i o n C a r d s
OWNER'S HANDBOOK
4 / 7