Fastening nets
Overview
The maximum load of the respective fastening nets
is 1.5 kg.
Rigid boot cover
Removing and inserting
The maximum load of the other fastening nets is
1 kg.
Removing
Inserting
Storage space and interior equipment ›
›
Unhook the straps.
›
Hold the raised cover
in place and press the
underside of the cover
on both sides.
›
Remove the cover.
›
Insert the mount
A
opposite the holder
B
on both sides of the
boot.
›
Press on the cover
from above until it en-
gages.
›
Hook in the retaining
straps.
Variable loading floor in the boot
Setting the position
The maximum load of the variable loading floor is
75 kg.
Install in the lower position
Set the variable loading floor to the upper position
Adjustments to the upper position is done in reverse
order.
Overview of passenger compartment
Overview of practical equipment in the front
Fastening nets
79
›
Grasp the variable
loading floor by the
handle and lift it in the
direction of the arrow
until it stops.
›
Pull out the variable
loading floor slightly,
slide it into the grooves
in the direction of the
arrow and place it on
the boot floor.