Table of Contents
Advertisement
176 Storage space and interior equipment ›
Fasten at the back
›
Remove the roll-up cover or fold the rear seat
backrests forward.
›
Insert the crossbar into the mount
and push it forwards.
›
Attach the bar to the other side in the same way.
›
Snap the carabiners
into the lashing eyes.
B
›
Pull the straps firmly at the free ends
Fasten at the front
The procedure is analogous to the process behind.
The lashing eyes for the carabiners are located under
the central body pillars.
Loosen
Loosening takes place in the reverse order to fasten-
ing.
Double-sided floor covering
Overview
Depending on the equipment, the vehicle may be
equipped with a double-sided floor covering in the
luggage compartment. One side is made of fabric,
the other side is washable.
Rigid boot cover
Removing and inserting
The maximum load of the other fastening nets is
1 kg.
Removing
Double-sided floor covering
on one side
A
.
C
›
Unhook the straps.
Inserting
Stow the cover behind the rear seats of a vehicle
without natural gas drive
Stow the cover behind the rear seats of a natural
gas vehicle
WARNING
The boot cover stowed behind the rear seats re-
stricts the driver's rear view.
›
Hold the raised cover
in place and press the
underside of the cover
on both sides.
›
Remove the cover.
›
Insert the attachment
opposite to the
A
holder
on both sides
B
of the boot.
›
Press on the cover
from above until it en-
gages.
›
Hook in the retaining
straps.
›
Remove the cover and
place it on the floor
cover in the boot.
›
Lift up the cover in the
front area.
›
Push the cover up be-
tween the rear seats
and the holder
.
A
›
Push the cover be-
tween the rear seats
and the holder
.
A
Advertisement
Table of Contents
