Frame Central Cover; Legshield - Gilera Nexus 500 Workshop Manual

Nexus 500

Frame central cover

- Remove the screw shown in the figure.
- Disengage the 6 coupling teeth and remove the
complete grid.
- Remove the side cover.
- Remove the saddle.
- Remove the fuel port.
- Remove the side grids.
- Remove the battery
- Loosen the nuts under the grids and at the sides
of the battery.
Remove the complete cover extracting it from top.

Legshield

- Remove the mirrors.
- Remove the windscreen with support.
- Remove the front light groups.
- Remove the top counter-shield.
- Remove the bottom counter-shield.
- Remove the 2 screws under the rearview mirrors.
- Remove the central screw (without non-threaded
rim) located behind the front headlight.
- Remove the 4 screws (2 per side) accessible
from the footrest and located to the sides of the
radiator.
Chassis
CHAS - 5