SIP User's Manual
Parameter
6.4.2
HTTPS Parameters
The Secure Hypertext Transport Protocol (HTTPS) parameters are described in the table
below.
Parameter
Web: Secured Web Connection
(HTTPS)
EMS: HTTPS Only
[HTTPSOnly]
EMS: HTTPS Port
[HTTPSPort]
EMS: HTTPS Cipher String
[HTTPSCipherString]
Web: HTTP Authentication Mode
EMS: Web Authentication Mode
[WebAuthMode]
Version 5.8
For a description of the parameters composing this table, refer to the
individual parameters described below.
To configure the firewall using the Web interface and for a description
of the parameters of this ini file table parameter, refer to Configuring
the Firewall Settings on page 77.
For a description of configuring with ini file table parameters, refer to
Format of ini File Table Parameters on page 191.
Table 6-21: HTTPS Parameters
Determines the protocol used to access the Web interface.
[0] HTTP and HTTPS (default).
[1] HTTPs Only = Unencrypted HTTP packets are blocked.
Note: For this parameter to take effect, a device reset is
required.
Determines the local Secured HTTPS port of the device.
The valid range is 1 to 65535 (other restrictions may apply
within this range).
The default port is 443.
Note: For this parameter to take effect, a device reset is
required.
Defines the Cipher string for HTTPS (in OpenSSL cipher list
format). For the valid range values, refer to URL
http://www.openssl.org/docs/apps/ciphers.html. The default is
EXP:RC4.
Note: For this parameter to take effect, a device reset is
required.
Determines the authentication mode for the Web interface.
[0] Basic Mode = Basic authentication (clear text) is used
(default).
[1] Digest When Possible = Digest authentication (MD5) is
used.
[2] Basic if HTTPS, Digest if HTTP = Digest authentication
(MD5) is used for HTTP, and basic authentication is used for
HTTPS.
Note: When RADIUS login is enabled (i.e., the parameter
WebRADIUSLogin is set to 1), basic authentication is forced.
241
6. Configuration Parameters Reference
Description
Description
September 2009