AudioCodes MP-124 User Manual page 471

SIP User's Manual
Example 3 - One interface exclusively for management (OAMP applications) and two
others for Call Control and RTP (CONTROL and MEDIA applications):
The Multiple Interface table is configured with four interfaces. One is exclusively for
Management and the two are for Call Control and RTP Media applications. Two of them are
IPv4 interfaces:
Index Application
0 OAMP
Media &
1
Control
Media &
2
Control
VLANs are required. The 'Native' VLAN ID is the same VLAN ID as the AudioCodes
Management interface (index 0). One routing rule is required to allow remote management
from a host in 176.85.49.0/24.
Destination Prefix Length
176.85.49.0
All other parameters are set to their respective default values. The ini file matching this
configuration can be written as follows:
; Interface Table Configuration:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName;
InterfaceTable 0
InterfaceTable 1
CntrlMedia1;
InterfaceTable 2
[\InterfaceTable]
; VLAN related parameters:
VlanMode = 1
VlanNativeVlanId = 1
; Routing Table Configuration:
RoutingTableDestinationsColumn = 176.85.49.0
RoutingTableDestinationPrefixLensColumn = 24
RoutingTableGatewaysColumn = 192.168.0.1
RoutingTableInterfacesColumn = 0
RoutingTableHopsCountColumn = 1
Version 5.8
Table 10-13: Multiple Interface Table - Example 3
Interface IP Address
IPv4 192.168.85.14
IPv4 200.200.85.14
IPv4 200.200.86.14
Table 10-14: Routing Table - Example 3
Subnet Mask
24
= 0, 10, 192.168.85.14,
= 5, 10, 200.200.85.14,
= 5, 10, 200.200.86.14,
Prefix Default
Length Gateway
16 0.0.0.0
24 200.200.85.1
24 0.0.0.0
Gateway
192.168.0.1
16, 0.0.0.0, 1, Mgmt;
24, 200.200.85.1, 201,
24, 0.0.0.0, 202, CntrlMedia2;
471
10. Networking Capabilities
VLAN Interface
ID Name
1 Mgmt
201 CntrlMedia1
202 CntrlMedia2
Interface Metric
0 1
September 2009