AudioCodes MP-124 User Manual page 338

Parameter
Web/EMS: Add Hunt Group ID as
Prefix
[AddTrunkGroupAsPrefix]
Web: Add Trunk ID as Prefix
EMS: Add Port ID As Prefix
[AddPortAsPrefix]
Add Trunk Group ID as Prefix to
Source
[AddTrunkGroupAsPrefixToSource]
SIP User's Manual
Description
PhoneContext_Ton, PhoneContext_Context;
[\PhoneContext]
For example:
PhoneContext 0 = 0,0,unknown.com
PhoneContext 1 = 1,1,host.com
PhoneContext 2 = 9,1,na.e164.host.com
Notes:
This parameter can include up to 20 indices.
For a description of the table's parameters, refer to the
individual parameter descriptions below.
Several entries with the same NPI-TON or Phone-
Context are allowed. In this scenario, a Tel-to-IP call
uses the first match.
Phone-Context '+' is unique in that it doesn't appear in
the Request-URI as a Phone-Context parameter.
Instead, it's added as a prefix to the phone number. The
'+' isn't removed from the phone number in the IP-to-Tel
direction.
To configure the Phone Context table using the Web
interface, refer to ''Mapping NPI/TON to Phone-Context''
on page 128.
For a description on using ini file table parameters, refer
to ''Format of ini File Table Parameters'' on page 191.
Determines whether the device's Hunt Group ID is added
as a prefix to the destination phone number (i.e., called
number) for Tel-to-IP calls.
[0] No = Don't add Hunt Group ID as prefix (default).
[1] Yes = Add Hunt Group ID as prefix to called
number.
Notes:
This option can be used to define various routing rules.
To use this feature, you must configure the Hunt Group
IDs (refer to Configuring the Endpoint Phone Numbers
on page 149).
Determines whether the port number is added as a prefix
to the called number for Tel-to-IP calls.
[0] No = port number/ not added as prefix (default).
[1] Yes = port number/ added as prefix.
If enabled, the port number (single digit in the range 1 to 8
for 8-port devices, two digits in the range 01 to 24 for MP-
124) is added as a prefix to the called (destination) phone
number.
This option can be used to define various routing rules.
Determines whether the device adds the Hunt Group ID
(from where the call originated) as the prefix to the calling
number (i.e. source number).
[0] No (default)
[1] Yes
338
MP-11x & MP-124
Document #: LTRT-65412