SIP User's Manual
2
Configuration Concepts
You can configure the device, using the following management tools:
The device's HTTP-based Embedded Web Server (Web interface), using any standard
Web browser (described in ''Web-based Management'' on page 25).
A configuration ini file loaded to the device (refer to ''ini File Configuration'' on page
189).
AudioCodes' Element Management System (refer to Element Management System
(EMS) on page 195).
Simple Network Management Protocol (SNMP) browser software (refer to the Product
Reference Manual).
Note:
Version 5.8
To initialize the device by assigning it an IP address, a firmware file (cmp),
and a configuration file (ini file), you can use AudioCodes' BootP/TFTP utility,
which accesses the device using its MAC address (refer to the Product
Reference Manual).
23
2. Configuration Concepts
September 2009