Call Detail Record; Table 9-8: Supported Cdr Fields - AudioCodes MP-124 User Manual

Below is an example of RADIUS Accounting, where the non-standard parameters are
preceded with brackets.
Accounting-Request (361)
user-name = 111
acct-session-id = 1
nas-ip-address = 212.179.22.213
nas-port-type = 0
acct-status-type = 2
acct-input-octets = 4841
acct-output-octets = 8800
acct-session-time = 1
acct-input-packets = 122
acct-output-packets = 220
called-station-id = 201
calling-station-id = 202
// Accounting non-standard parameters:
(4923 33) h323-gw-id =
(4923 23) h323-remote-address = 212.179.22.214
(4923 1) h323-ivr-out = h323-incoming-conf-id:02102944 600a1899
3fd61009 0e2f3cc5
(4923 30) h323-disconnect-cause = 22 (0x16)
(4923 27) h323-call-type = VOIP
(4923 26) h323-call-origin = Originate
(4923 24) h323-conf-id = 02102944 600a1899 3fd61009 0e2f3cc5
9.13

Call Detail Record

The Call Detail Record (CDR) contains vital statistic information on calls made by the
device. CDRs are generated at the end and (optionally) at the beginning of each call
(determined by the parameter CDRReportLevel), and then sent to a Syslog server. The
destination IP address for CDR logs is determined by the parameter CDRSyslogServerIP.
For CDR in RADIUS format, refer to ''Supported RADIUS Attributes'' on page 417.
The following table lists the supported CDR fields.
Field Name
ReportType
Cid
CallId
Trunk
BChan
ConId
TG
EPTyp
Orig
SourceIp
DestIp
TON
NPI
SIP User's Manual

Table 9-8: Supported CDR Fields

Report for either Call Started, Call Connected, or Call Released
Port Number
SIP Call Identifier
Physical Trunk Number (always set to '-1', as not applicable)
Selected B-Channel (always set to '0', as not applicable)
SIP Conference ID
Trunk Group Number
Endpoint Type
Call Originator (IP, Tel)
Source IP Address
Destination IP Address
Source Phone Number Type
Source Phone Number Plan
420
Description
Document #: LTRT-65412
MP-11x & MP-124