Coders And Profile Definitions - AudioCodes MP-124 User Manual

Parameter
Contact User
[Account_ContactUser]
Application Type
[Account_ApplicationType]
3.3.4.4

Coders and Profile Definitions

The Coders And Profile Definitions submenu includes the following page items:
Coders (refer to ''Configuring Coders'' on page 105)
Coder Group Settings (refer to ''Configuring Coder Groups'' on page 107)
Tel Profile Settings (refer to ''Configuring Tel Profiles'' on page 108)
IP Profile Settings (refer to ''Configuring IP Profiles'' on page 110)
Implementing the device's Profile features, provides the device with high-level adaptation
when connected to a variety of equipment (at both Tel and IP sides) and protocols, each of
which requires different system behavior.
You can assign different Profiles (behavior) per call, using the call routing tables:
'Tel to IP Routing' page (refer to ''Configuring the Tel to IP Routing Table'' on page
131)
'IP to Hunt Group Routing' page (refer to ''Configuring the IP to Trunk Group Routing''
on page 135)
In addition, you can associate different Profiles per the device's channels.
SIP User's Manual
From:
<sip:ContactUser@HostName>;tag=1c1397576231
To: <sip: ContactUser@HostName >
Call-ID: 1397568957261200022256@10.33.37.78
CSeq: 1 REGISTER
Contact:
<sip:ContactUser@10.33.37.78>;expires=3600
Expires: 3600
User-Agent: Audiocodes-Sip-Gateway-MP-118
FXS_FXO/v.5.40A.008.002
Content-Length: 0
Notes:
The Trunk Group account registration is not effected by the
parameter IsRegisterNeeded.
If registration to an IP Group(s) fails for all the accounts defined
in this table for a specific Hunt Group, and if this Group
includes all the channels in the , the Hunt Group is set to Out-
Of-Service if the parameter OOSOnRegistrationFail is set to 1
(refer to ''Proxy & Registration Parameters'' on page 94).
Defines the AOR user name. It appears in REGISTER From/To
headers as ContactUser@HostName, and in INVITE/200 OK
Contact headers as ContactUser@<device's IP address>. If not
configured, the 'Contact User' parameter from the 'IP Group Table'
page is used instead.
Note: If registration fails, then the user part in the INVITE Contact
header contains the source party number.
Note: This parameter is not applicable.
104
MP-11x & MP-124
Description
Document #: LTRT-65412