AudioCodes MP-124 User Manual page 331

SIP User's Manual
Parameter
Web: Use Routing Table for Host
Names and Profiles
EMS: Use Routing Table For Host
Names
[AlwaysUseRouteTable]
Web/EMS: Tel to IP Routing
Mode
[RouteModeTel2IP]
Tel to IP Routing Table
[Prefix]
Version 5.8
received from IP, the IP Source Number is used as the Tel
Source Number and Presentation is set to Restricted (1).
For example: When 'from: 100 <sip:200@201.202.203.204>' is
received, the outgoing Source Number and Display Name are
set to '100' and the Presentation is set to Allowed (0).
When 'from: <sip:100@101.102.103.104>' is received, the
outgoing Source Number is set to '100' and the Presentation is
set to Restricted (1).
Determines whether to use the device's Routing table to obtain
the URI host name and optionally, an IP profile (per call), even if
a Proxy server is used.
[0] Disable = Don't use internal routing table (default).
[1] Enable = Use the 'Tel to IP Routing' table .
Notes:
This parameter appears only if the 'Use Default Proxy'
parameter is enabled.
The domain name is used instead of a Proxy name or IP
address in the INVITE SIP URI.
For a description of this parameter, refer to ''Configuring the Tel
to IP Routing Table'' on page 131.
This ini file table parameter configures the 'Tel to IP Routing'
table for routing Tel-to-IP calls. The format of this parameter is
as follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix,
PREFIX_ProfileId, PREFIX_MeteringCode,
PREFIX_DestPort, PREFIX_SrcIPGroupID,
PREFIX_DestHostPrefix, PREFIX_DestIPGroupID,
PREFIX_SrcHostPrefix, PREFIX_TransportType,
PREFIX_SrcTrunkGroupID;
[\PREFIX]
For example:
PREFIX 0 = *, quest, *, 0, 255, $$, -1, , 1, , -1, -1;
PREFIX 1 = 20, 10.33.37.77, *, 0, 255, $$, -1, , 2, , 0, -1;
PREFIX 2 = 30, 10.33.37.79, *, 1, 255, $$, -1, , -1, , 2, -1;
Notes:
This parameter can include up to 50 indices.
For a detailed description of the table's parameters and for
configuring this table using the Web interface, refer to
''Configuring the Tel to IP Routing Table'' on page 131.
The parameters PREFIX_SrcIPGroupID,
PREFIX_DestHostPrefix and PREFIX_SrcHostPrefix are
currently not applicable and must be left empty (or -1). (They
are used only for IP-to-IP routing, supported in the next
applicable release).
For a description on using ini file table parameters, refer to
331
6. Configuration Parameters Reference
Description
September 2009