Protocol Definition - AudioCodes MP-124 User Manual

3.3.4.2

Protocol Definition

The Protocol Definition submenu allows you to configure the main SIP protocol
parameters. This submenu contains the following page items:
SIP General Parameters (refer to ''SIP General Parameters'' on page 92)
DTMF & Dialing (refer to ''DTMF & Dialing Parameters'' on page 93)
3.3.4.2.1 Configuring SIP General Parameters
The 'SIP General Parameters' page is used to configure general SIP parameters. For a
description of the parameters appearing on this page, refer to "Configuration Parameters
Reference" on page 213.
To configure the general SIP protocol parameters:
1. Open the 'SIP General Parameters' page (Configuration tab > Protocol
Configuration menu > Protocol Definition submenu > SIP General Parameters
page item).
SIP User's Manual
Figure 3-58: SIP General Parameters Page
92
MP-11x & MP-124
Document #: LTRT-65412