AudioCodes MP-124 User Manual page 121

SIP User's Manual
To configure the Stand-Alone Survivability parameters:
1. Open the 'SAS Configuration' page (Configuration tab > Protocol Configuration
menu > SAS submenu > Stand Alone Survivability page item).
2. Configure the parameters as described in ''SIP Configuration Parameters'' on page
252.
3. Click the Submit button to apply your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
To configure the SAS Routing table, under the SAS Routing group, click the SAS Routing
Table
refer to ''Configuring the IP2IP Routing TablE (SAS)'' on page 122.
Version 5.8
Figure 3-72: SAS Configuration Page
button to open the 'IP2IP Routing Table' page. For a description of this table,
121
3. Web-Based Management
September 2009