Chapter 3 Os Installation Using Serverstart; Guided Mode; Starting Up The Guided Mode - Fujitsu Primergy RX100 S2 User Manual

Chapter 3 OS Installation Using ServerStart

3.1 Guided mode

In guided mode, follow the wizard to specify hardware configuration and the OS to be
installed, save the information necessary for installation in a configuration file, and
install the OS.

3.1.1 Starting Up the Guided Mode

Start up the guided mode.
1
Turn on the server and insert the ServerStart CD-ROM immediately.
ServerStart starts up and a message appears prompting you to insert the ServerStart floppy disk.
2
Insert the ServerStart floppy disk supplied with the server. Make sure that
"Removable media" and "A:" are selected and click [Create].
54
Set the ServerStart floppy disk in the write-enabled state.