Selecting An Installation Method; Supported Os; Installation Modes Of Serverstart - Fujitsu PRIMERGY RX600 S4 User Manual

2.2 Selecting an Installation Method

When installing the OS with ServerStart, there are multiple installation methods. Prior
to OS installation, refer to the following to decide on the method.

2.2.1 Supported OS

The following operating systems can be installed by using ServerStart V6.711.
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
ServerStart does not support OS installation of Linux.
Any of unsupported OS can not be installed.

2.2.2 Installation Modes of ServerStart

Quick Installation mode
This mode completes the OS installation by executing plain settings. Select this mode when you want to
install the OS quickly and simply. To install while maintaining the established RAID environment, the
Quick Installation mode must be selected to install the OS.
Select [Logical Disk 0] in the [Select the Boot Controller and Boot Disk] window and install the OS.
Expert mode
In this mode, start up Disk Manager and format the partition where your OS is installed prior to
installation of the OS. Select the Expert mode only when installing the OS while maintaining the
existing partitions. Also, when using ServerStart while maintaining the existing partitions, start up Disk
Manager, format an installation partition and install the OS.
®
2003, Standard Edition
®
2003, Enterprise Edition
®
2003, Standard x64 Edition
®
2003, Enterprise x64 Edition
®
2003 R2, Standard Edition
®
2003 R2, Enterprise Edition
®
2003 R2, Standard x64 Edition
®
2003 R2, Enterprise x64 Edition
PRIMERGY RX600 S4 User's Guide
47