Bios Setting With Expansion Card Installed - PRIMERGY BX620 S3 User Manual

7.8 BIOS Setting with Expansion
Card Installed
In this server blade, you need to change the settings of the BIOS Setup Utility
according to installation conditions when installing the 2Gbit/s FC I/O Module (PG-
FCD101/PG-FCD102), 1Gbit/s Ethernet I/O Module (PG-LND101), Eth. Ctrl 2 x 1Gbit
PCI-E 1000-BASE-T lp (PG-2861L) of an expansion card slot module, or SCSI Ctrl
U160 lp (PG-1301L).
For a device that starts the OS, use the BIOS Setup Utility to set the optional ROM (OPROM) to
[Enabled].
For more details on the setting procedures, refer to "8.2.5 PCI Configuration Submenu" ( pg.214) in the
[Advanced] menu.
PRIMERGY BX620 S3 Server Blade User's Guide
1
7
203