Chapter 4 Manual Os Installation; Creating Driver Disks; Required Driver Disks - PRIMERGY BX620 S3 User Manual

Chapter 4 Manual OS Installation

4.1 Creating Driver Disks

When installing the OS manually, it is necessary to create driver installation disks
beforehand. Also, driver disks must be created when you add an expansion card
during server operation.

4.1.1 Required Driver Disks

You need floppy disks for driver disks. A floppy disk is necessary for each driver.
Required driver disks vary with the OS.
Standard driver provided with the OS is installed automatically at the OS installation.
You need a Server Start Disc 1 CD-ROM to install the driver provided with the Server Start CD-ROM.
Prepare for it in advance.
■ For Windows Server 2003 x64
Expansion board / onboard controller
Chipset
Graphic controller
Onboard LAN controller
Onboard SAS array controller
2Gbit/s FC I/O Module (PG-FCD101/PG-FCD102)
LAN card (PG-2861L)
1Gbit/s Ethernet I/O Module (PG-LND101/PG-LND102)
SCSI card (PG-1301L)
100
table: Drivers Required for Installing Windows Server 2003 x64
Driver
Driver provided with the Server Start CD-ROM
Driver provided with the Server Start CD-ROM
Driver provided with the Server Start CD-ROM
Onboard SAS array controller Driver Windows
2003 for x64 Edition Drivers Disk V1.21.13L10
2Gbit/s FC I/O Module Driver Windows 2003 for
x64 Edition Drivers Disk v9.0.2.17
Driver provided with the Server Start CD-ROM
OS standard