Preconfiguration Mode; Starting Up The Preconfiguration Mode - PRIMERGY BX620 S3 User Manual

3.2 Preconfiguration Mode

In preconfiguration mode, set and save the information necessary for installation in a
configuration file on a client computer (with a CD-ROM drive and 10MB or more of
free space). Set the saved configuration file on the server for installation.
If ServerStart is not installed in the client computer where the preconfiguration mode is executed, refer
to "2.4 Preparation for Using ServerStart on a Client Computer" ( pg.42) to install ServerStart. If a
different version of ServerStart has been installed, uninstall it and install the proper version. For details
on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" ( pg.44).
ServerStart can be installed to the server where Windows 2000 Server or Windows Server 2003 is
installed. Note that ServerStart cannot be installed to the server where Windows Server 2003 x64 is
installed.

3.2.1 Starting Up the Preconfiguration Mode

Start up the preconfiguration mode.
1
Start up ServerStart.
If ServerStart has already been started, it is not necessary to start it up again. If it has not, start it
up according to the following procedures:
1. Insert the ServerStart Disc 1 CD-ROM into the client computer's CD-ROM drive.
2. Click [Start] → [Programs] → [Fujitsu Siemens ServerStart] → [ServerStart(Start
from CD)].
ServerStart starts up and the [Welcome to ServerStart] window appears.
PRIMERGY BX620 S3 Server Blade User's Guide
3
63