Preparation For Using Serverstart On A Client Computer; Installing Serverstart - PRIMERGY BX620 S3 User Manual

Chapter 2 Checking before OS Installation
2.4 Preparation for Using ServerStart
on a Client Computer
When using the preconfiguration mode for setting installation information in advance
or when creating a driver disk using the FloppyBuilder function, install ServerStart on
the client computer.
Using ServerStart on the server
ServerStart can be installed to the server where Windows 2000 Server or Windows Server 2003 is
installed. Perform the procedure in "2.4.1 Installing ServerStart" ( pg.42) to install ServerStart.
Note that ServerStart cannot be installed to the server where Windows Server 2003 x64 is installed.
●
System Requirements for Client Computers
Client computers must satisfy the following requirements.
Hardware
Software

2.4.1 Installing ServerStart

If a different version of ServerStart has been installed, uninstall it. The FloppyBuilder function or
installation wizard may not operate properly on a different version.
For details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" ( pg.44).
42
Personal computers operated with Windows XP Professional, or Windows 2000 Professional
(A CD-ROM drive and 10MB or more of free space are required.)
Microsoft® Internet Explorer 5.5 or later