Vlan Setup Procedure - PRIMERGY BX620 S3 User Manual

■ For Windows Server 2003, Windows 2000 Server
If the OS is installed using ServerStart, "BACS" is already installed with the driver. If the OS is installed
manually, BACS will not be installed.
1
Execute the following file contained in the ServerStart Disc 1 CD-ROM.
[CD-ROM drive]: \PROGRAMS\GENERAL\Broadcom\MgmtApps\setup.exe
The installer starts up.
2
Proceed the installation by following the window instructions.
When the window below appears during the installation procedure, check [BASP] and click
[Next].

5.6.2 VLAN Setup Procedure

1
Start up BACS. The procedure differs depending on the OS being used.
For Windows Server 2003 / Windows Server 2003 x64
1. Click [Start] → [Control Panel] → [Broadcom Control Suite 2].
For Windows 2000 Server
1. Click [Start] → [Settings] → [Control Panel].
The [Control Panel] window appears.
2. Start up "Broadcom Control Suite 2".
2
Right-click a LAN adapter or the Team name of a Teamed Up adapter and click
[Add VLAN] from the displayed menu.
A LAN adapter is displayed with a
The Team name of a Teamed Up adapter is displayed with a
PRIMERGY BX620 S3 Server Blade User's Guide
mark.
mark.
1
2
3
4
5
6
7
8
9
153