How To Install/Remove Memory Module - PRIMERGY BX620 S3 User Manual

Chapter 7 Installing Internal Options

7.4.3 How to Install/Remove Memory Module

This section explains how to install and remove memory modules.
1
Turn off the server blade.
→ "3.3 Turning off the Server" in "BX600 S2 Blade Server System Unit Hardware Guide"
2
Touch a metal part of the chassis to discharge static electricity.
3
Remove the server blade from the chassis to install a memory module.
→ "4.2 Installing Server Blades" in "BX600 S2 Blade Server System Unit Hardware Guide"
4
Remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.176)
5
Install or remove memory modules.
• Installing
Insert a memory module properly into the memory slot. The levers close. If the levers are not
closed completely, push them with your fingers.
• Removing
Open the levers on both ends.
Lever
6
Check that the memory module is inserted all the way.
7
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.176)
188
Align
notch
• Make sure not to open the clips outward too quickly because the memory
module may pop up, which could cause damage.
• An improperly engaged memory module could cause a fire. Do not insert the
memory module on the wrong side.