System Requirements For Remote Resource/Pxe Servers - PRIMERGY BX620 S3 User Manual

●
Remote Installation Using a Remote Resource Server
In remote installation using a remote resource server, ServerStart starts up on the target server.
Procedures for starting installation are the same as those in normal installation (preconfiguration,
guided, and expert modes). Once installation started, resources necessary for installation are provided
from the remote resource server. Thus, procedures such as inserting a CR-ROM are not necessary.
Active ServerStart
and start installation
Target server
3.4.2 System Requirements for Remote Resource/PXE
Servers
Because remote installation is performed via a network, the environment must have at least one
Windows server and a local area network.
In addition, the following environment is required.
■ Remote Resource/PXE Server Requirements
OS Windows 2000 Server SP2 to 4
Windows Server 2003
Memory 256MB or more
Operating • DHCP server function (required on the same
environment network)
• File sharing function (required)
Notes on the PXE server
Check that no other PXE server exists on the same LAN.
Servers installed with software with the PXE function such as SystemcastWizard/SystemcastWizard
Professional, Quick Recovery Manager, or the Microsoft RIS function cannot be used as a PXE server.
1) Request resources
2) Supply resources
table: System Requirements for Remote Resource/PXE Servers
PXE server
PRIMERGY BX620 S3 Server Blade User's Guide
- OS
- Service Pack
- Application
etc.
Remote resource server
Remote resource server
Windows Server 2003
Windows 2000 Server
256MB or more
• File sharing function (required)
3
77