Raid Management Tool [Global Array Manager]; Installing Raid Management Tool (Global Array Manager) - PRIMERGY BX620 S3 User Manual

Chapter 6 High Reliability Tools
6.1 RAID Management Tool [Global
Array Manager]
RAID Management Tool is software that performs array configuration, disk
initialization and disk array monitoring. For more details, refer to "MegaRAID SAS
User's Guide" of the Array Controller Document & Tool CD.
OS installation using ServerStart
If the OS is installed using ServerStart, RAID Management Tool is installed with the OS and other high
reliability tools.
6.1.1 Installing RAID Management Tool (Global Array
Manager)
To Install RAID Management Tool individually using the standard installer, follow the procedures
below.
Before installing Global Array Manager, check that TCP/IP is installed and works properly.
1
Log on to the server with administrator privileges.
2
Connect the USB CD-ROM drive to the server blade.
Use the USB Cable to connect the USB CD-ROM drive. For more information on the connection
procedure, refer to "Start Guide".
3
Insert the Array Controller Document & Tool CD. Click [Start] → [Run...].
4
Enter a name in the [Open:] field as follows and click [OK].
[CD-ROM drive]:\RAIDTOOL\GAM\Windows\install.bat
Installation starts and the wizard window appears.
For subsequent procedures, refer to "MegaRAID SAS User's Guide" in the Array Controller
Document & Tool CD.
166
Exit all programs before starting installation.
Installation will fail if "Event Viewer" or "Computer Management" is run.