Advanced Adapter Settings Submenu - PRIMERGY BX620 S3 User Manual

Table of Contents

Advertisement

Chapter 8 Hardware Configuration/Utilities

8.3.6 Advanced Adapter Settings Submenu

Performs detailed settings for HBA operations.
Selected Adapter
Adapter Type
QLA23nn
Use <Arrow keys> to move cursor, <Enter> to select option, <ESC> to backup
Item
Execution Throttle
Luns per Target (#Luns
(Range))
Enable LIP Reset
Enable LIP Full Login
Enable Target Reset
236
Qlogic Fast!UTIL Version n.nn
I/O Address
9n00
Advanced Adapter Settings
Execution Throttle:
Luns per Target:
Enable LIP Reset:
Enable LIP Full Login:
Enable Target Reset:
Login Retry Count:
Port Down Retry Count:
Link Down Timeout:
Extended Error Logging: Disabled
RIO Operation Mode:
Interrupt Delay Timer:
table: Items on the Advanced Adapter Settings Submenu
Setting
• 256 (at the time of
purchase)
• 1−256
• 0 (0−0)
• 8 (0−7)
• 16 (0−15)
• 32(0−31)
• 64 (0−63)
• 128(0−127)
• 256 (0−255) (at the time
of purchase)
• No (at the time of
purchase)
• Yes
• Yes (at the time of
purchase)
• No
• Yes (at the time of
purchase)
• No
256
256
No
Yes
Yes
8
45
45
0
0
Description
Specify the maximum number of commands
executed on any port. When the port reaches the
execution throttle, the Fast!UTIL utility does not
execute any new command until the execution of
the current command ends.
Note:
When connecting with the ETERNUS3000
or ETERNUS6000 series, set to "16".
Specify the number of LUNs for each target.
Multiple LUN support is for the RAID storage unit
that generally maps drives through LUN. If
multiple LUN support is not required, set the
number of LUNs to "0".
Determines the type to reset the loop initialization
process (LIP) when the OS starts the bus reset
routine.
• Yes
The driver starts global LIP resetting, and clears
the reservation of the target device.
• No
The driver starts global LIP resetting in the full
login mode.
Instructs the ISP chip to log in all ports again after
LIP.
Enables the driver to issue the Target Reset
command to all devices on the loop when the SCSI
Bus Reset command was issued.

Advertisement

Table of Contents
loading

Table of Contents