Installing The Lan Driver - PRIMERGY BX620 S3 User Manual

4
Click the [Driver] tab and click [Update Driver].
The [Hardware Update Wizard] window appears.
5
Select [Install the software automatically] and click [Next].
The driver will be installed.
6
Click [Finish].
7
Click [Close].
Confirm that all the LAN adapters with the updated driver are updated properly.
Do not specify a lower value in [Receiving descriptor] for the properties of the LAN adapter.

4.3.3 Installing the LAN Driver

Perform the following procedures for all the [Ethernet controller] under [Other devices] in [Device
Manager].
■ For Windows Server 2003 x64
1
Insert the ServerStart Disc 1 CD-ROM into the server.
2
Click [Start]→[Administrative Tools]→[Computer Management].
3
Click [Device manager].
4
Double-click [Ethernet controller] under [Other devices].
The properties window for the Ethernet controller appears.
5
Click [Driver] tab and click [Updating drivers].
"Welcome to Hardware updating wizard" appears.
6
Select "Install from the list or specified location" and click [Next].
7
Select "Not searching, and select installation driver" and click [Next].
8
Click "Use disk".
9
Specify the following file name to "Copies file from manufacturer's file" and click
[OK].
[CD-ROM drive]:\DRIVERS\LAN\INTEL\Pro1000\Ws03_32e
10
Click [Next].
Drivers installation starts.
PRIMERGY BX620 S3 Server Blade User's Guide
1
2
3
4
5
6
7
8
9
119