B Configuration Sheets Of Bios Setup Utility Parameters; B.1 Parameters In The Main Menu - PRIMERGY TX200 S3 Configuration Manual

B Configuration Sheets of BIOS Setup Utility Parameters
Ｂ Configuration Sheets of BIOS
Setup Utility Parameters
Use this form to record the settings of the BIOS Setup Utility. If you have not changed
the initial value, check the box of "The initial values have been unchanged".
The initial values in the dotted frame can be changed. If you change any setting, put
a check mark in the bracket of the "Setting" column.
Keep the values on the gray zones unchanged.
Follow the procedure below to start the BIOS Setup Utility.
When the following message appears on the screen during POST, press the [F2] key while the
message is displayed. When POST is completed, the Main menu screen appears.
<F2> BIOS Setup/ <F12> Boot Menu
If the system starts before starting the BIOS Setup Utility, press the [Ctrl] + [Alt] + [Delete] keys
simultaneously and restart the system.
Ｂ.１ Parameters in the Main menu
（ ） The initial values have been unchanged.
Item
System Time:
System Date:
Diskette A:
> Standard IDE
> Boot Option
Base Memory:
Extended Memory:
■Standard IDE Submenu
（ ） The initial values have been unchanged.
Item
Standard IDE: [CD-ROM]
PIO Mode:
DMA Mode:
Firmware:
Initial value
HH:MM:SS Displays/Sets present time.
MM/DD/YYYY Displays/Sets present date.
1.4M ( )None ( )360K ( )1.2M ( )720K
CD-ROM ■Links to the Standard IDE submenu
■Links to the Boot Option submenu
640KB Displays the available base memory
size below 1MB.
xxxM Displays the memory size.
Initial value
PIO 4 Displays the PIO mode supported by
devices.
UDMA 2 Displays the DMA mode supported by
devices.
x.xx Displays the firmware version.
6
Setting
Setting