Updating Lan Drivers - PRIMERGY BX620 S3 User Manual

• When a recognized network adapter is present
Perform "4.3.2 Updating LAN Drivers" ( pg.117) on the LAN device name under [Network
adapters], then "4.3.3 Installing the LAN Driver" ( pg.119) on [Ethernet controller] under
[Other devices].
When the LAN driver is installed to [Other devices] before updating the driver for the network
adapter recognized immediately after the OS installation, the screen below will appear after
driver installation was initiated.
Clicking [Finish] displays the [Help and Support Center] window. Click [X] to close the window.
After installation, the "!" mark is displayed at the LAN device name in Device Manager. Device
names are displayed properly when all LAN drivers are installed and the system is restarted.
• When a recognized network adapter is not present
Perform "4.3.3 Installing the LAN Driver" ( pg.119) on [Ethernet controller] under [Other
devices].

4.3.2 Updating LAN Drivers

Perform the following procedure on all LAN device names under [Network adapters] in [Device
Manager].
■ For Windows Server 2003 x64
1
Double-click a LAN device name under [Network adapters].
Names of the LAN devices are displayed as follows.
1Gbit/s Ethernet I/O Module
(PG-LND101/PG-LND102)
LAN Card (PG-2861L)
2
Insert the ServerStart Disc 1 CD-ROM to the server.
table: LAN device name
Type of LAN device
PRIMERGY BX620 S3 Server Blade User's Guide
LAN device name
Intel(R) PRO/1000 MB Dual Port Server Connection
Intel(R) PRO/1000 MT Dual Port Server Adapter
1
2
3
4
5
6
7
8
9
117