Starting And Exiting Server Management Tools - PRIMERGY BX620 S3 User Manual

9.3.2 Starting and Exiting Server Management Tools

The steps for starting and exiting Server Management Tools are as follows:
■ Preparation for Using Server Management Tools
To use Server Management Tools, prepare the "Server Management Tools" disk supplied with the server
at hand.
Use the USB Cable to connect to the floppy disk drive to the server blade.
For details, refer to the "Start Guide".
■ Starting Server Management Tools
Before starting up the system from the "Server Management Tools" disk, first check that the
ServerView "OS Boot Monitoring" function is disabled (default setting is "Disabled").
If you start up the system while the "OS Boot Monitoring" function remains enabled, the operation of
the server blade may become unpredictable at such times as an abrupt power interruption or restart.
If the "OS Boot Monitoring" function is needed, it should be reset to enabled before resuming normal
server operation. For details of ServerView, refer to "ServerView User's Guide".
1
Turn on the server and insert the "Server Management Tools" disk into the
floppy disk drive.
The window for selecting a keyboard appears.
Please select:
1 = JP Keyboard
2 = US Keyboard
Your selection
2
Select a keyboard.
Select "1" for the Japanese keyboard or "2" for the English keyboard. The Japanese keyboard is
selected by default.
PRIMERGY BX620 S3 Server Blade User's Guide
9
259